   admin@shunlisteel.cn        +86 13739192886 
Home » News

News Center

  • [Industry knowledge] What is a SSAW Pipe Pile
    Spiral submerged arc welded steel pipe is a kind of metal pipe with spiral seam welded by submerged arc welding technology.SSAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature.
  • [Industry knowledge] How to test the compressive capacity of SSAW steel pipe?
    Spiral submerged arc pipe (SSAW pipe) is its advancing direction and the forming angle of the center line of the formed tube. The side forming edge is welded and welded into a spiral shape.
  • [Industry knowledge] Weld Defect and Detection of SSAW Pipe Pile
    Because ssaw steel pipe can be made by a coil width continuous forming welding production, easy automation, and using double-sided automatic submerged arc welding type, there are a variety of testing method to check weld quality assurance checks.
  • [Industry knowledge] how to replace a clutch
    The replacement method of the clutch is to use the bracket raising device and use the trolley jack to remove the gearbox. It is strongly recommended to use a clutch alignment tool, otherwise you may spend a lot of time trying to align the clutch plate and input shaft spline.
  • [Industry knowledge] How to choose SSAW steel pipe?
    The use rate of SSAW steel pipe is relatively high, and the application range is very wide. How to choose before choosing should pay attention to the quality.The first method is a more professional detection method,which is to detect by the strength of the pressure vessel.
  • [Industry knowledge] The difference between single-sided and double-sided welding of ssaw steel pipe
    The influence of ssaw steel pipe production process factors on the quality of single-side welding double-sided forming welds mainly includes welding current, welding speed, number of welding layers
  • [Industry knowledge] How to maintain the clutch
    The sleeve of the friction clutch of the cold rolling mill is installed on the top of the motor shaft, the sprocket is installed on the gear sleeve in a certain direction, the friction plates are installed on both sides, and the positioning ring is installed in an inner hole.
  • [Industry knowledge] how to install a clutch
    Through the clutch, a shaft is combined with the engine power, so that the power continues to be transmitted. In the clutch, there is an indispensable buffer device. It consists of two disks similar to a flywheel. A rectangular groove is punched on the disk. Springs are arranged in the grooves.
  • [Industry knowledge] how to drive clutch
    A clutch includes a driving rotating body connected with a driving source such as a motor, and a driven rotating body directly engaged with the driving rotating body. Two rotating bodies are received in the housing,
  • [Industry knowledge] how to break in a clutch
    A friction clutch of a cold rolling mill includes a sleeve seat, an end face gland, a clamping plate, a sprocket, a pin, a friction plate, a positioning ring, an end face nut, a retaining ring, and an elastic element. Through the example of the friction clutch of the cold rolling mill
  • Total 72 pages  Go to Page
  • Go
CONTACT US TODAY!

Contact with us

Shunli Steel Group
Tel: 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: 0086-13739192886;
001-9023936528(Canada & USA)

QQ: 236979001
E-mail: admin@shunlisteel.cn

Get in touch

CONTACT US TODAY!
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved sheet piling prices