Publish Time: 2018-11-08 Origin: Site
Lightweight sheet piling produces a wide range of retaining wall solutions to meet almost all sheet pile applications. Omega 18 special connectors can also be connected together to form pairs of U-shaped piles to form jagged walls. Sheet pile can be provided in the width range of pile wall per meter, and the modulus of section varies from 500 to 8700cm3. As a result, the boundary between hot-rolled sheet piles and cold-formed sheet piles becomes more and more blurred, and there are more and more intersections in application. In this arrangement, the pairs of piles are directed to each other at 90 degrees, forming a deep wall with very high inertia and section modulus. This allows the selection of the most economical sheet pile to meet the design requirements and the expected construction methods.
The latest trend of steel sheet pile technology is thinner and wider production. In addition to rigid structure sheet piling prices, the inertia moment of each pile is relatively large, so reuse is allowed. ESC constantly strives to modify the existing design to better meet customer requirements, and introduces new pile series suitable for different applications. If the contribution is considered in the design process, the Omega 18 connector must also be welded.
Sheet piling is a type of service verified by designers and builders. U-shaped sheet piles are widely used in permanent structures, temporary retaining works and temporary cofferdams. N-IA, SN-I, SN-II are good news for consumers because they provide a wider alternative to sheet piles for almost all types of projects. The cross-section selection of such walls must include driving performance standards, and designers must ensure that they are cut off. The surface is pressed or welded together to ensure that shear force is transmitted through interlocking on the neutral axis.
At the same time, the improvement of steel leads to thicker plates used for cold rolling / forming sheet pile. The sheet pile has very high tensile strength in its interlocking part. It is suitable for SN-IA, SN-I, SN-II, SN-IIU, SN-II I U, SN-V, SN-VU.
We have always been able to customize the design configuration files to meet project specific requirements. Its section modulus ranges from 529 to 3,820 cm3 per meter of pile wall width. We can do almost unlimited contour options, such as SN-IIU, SN-IIIU, SN-V, SN-VU.
| Dimensions | Weight | Per meter of wall | |||||
| Types | Thickness | Width | Height | Per pile | Per wall | Modulus of Section | Moment of Inertia |
| mm | mm | mm | Kg/m | Kg/m2 | Cm3/m | Cm4/m | |
| SN-I A | 4 5 | 250 250 | 34 35 | 10.3 12..9 | 41.2 51.6 | 31.6 39.2 | 71.2 89.2 |
| SN-I | 4 5 | 333 333 | 34 35 | 12.8 16.0 | 38.4 48 | 45.0 55.0 | 76.5 96.0 |
| SN-II | 4 5 | 250 250 | 39.5 40.5 | 11.3 14.2 | 45.2 56.8 | 60.0 71.6 | 140.7 160.5 |
| SN-II U | 4 5 | 333 333 | 45.5 46.5 | 14.2 17.9 | 42.6 53.7 | 108 137 | 385 476 |
| SN-III U | 5 6 | 333 333 | 85 87 | 19.3 23.3 | 57.9 69.9 | 272 330 | 2000 2480 |
| SN-V | 6 7 | 400 400 | 149 150 | 35.3 41.2 | 88.2 103 | 473 538 | 3550 4050 |
| SN-VU | 5 6 7 | 500 500 500 | 160 161 162 | 33.6 40.4 47.1 | 67.2 80.8 94.2 | 452 540 626 | 3620 4360 5080 |