English
magyar
Filipino
Nederlands
Italiano
Deutsch
Português
Español
Pусский
Français
العربية
简体中文

Home » News » Industry knowledge » ​sheet piling ZZ48-580 ZZ44-700 ZZ46-700 ZZ48-700

​sheet piling ZZ48-580 ZZ44-700 ZZ46-700 ZZ48-700

Publish Time: 2018-04-28     Origin: ​sheet piling ZZ48-580 ZZ44-700 ZZ46-700 ZZ48-700

Steel sheet piles, including ZZ44-700 ZZ46-700 and ZZ48-700, require compliance with contractor safety rules and OSHA or national safety regulations. The anchored wall must be stable both internally and externally. Warning signs of no smoking and open fires should be posted, maintained and enforced around fuel and other flammable and inflammable materials storage areas. Internal stability requires that the ZZ44-700 wall anchor must be fully located behind the wall so that the anchor will not bear the load resistance from the retaining wall of the steel sheet piling prices wall, unless the load resistance reduces the amount of soil produced by the retaining soil. In addition, workers receive safety training through their craft training program. All ignition sources ZZ46-700 shall be prohibited in storage, handling and processing of flammable liquids.


Appropriate "no smoking" signs should be posted in these areas. The wall is stable when there is enough safety factor when any failure surface between the wall and the ZZ48-700 wall anchor is applied when the available anchorage resistance is applied.  According to one study, construction workers receiving safety training reduced worker compensation claims by 12%, while claims for workers under 25 were reduced by 42%. The external stability is satisfied when any failure surface passing through the anchor bolt of the wall has adequate safety factor. The ZZ50-700 security factors in article 5.2.2.3 are applicable. After approval by the fire department, these quantities should be limited to no more than one day. This is very important in an industry that takes 5% of the total wage to cover costs related to work-related injuries. No inflammable or flammable ZZ52-700 can be stored in any closed building without the Seattle fire department (or the seaport of the Seattle Fire Bureau), approval of facilities management and construction safety.

The size of the plate pile ZZ50-700 and the ZZ52-700 or ZZ48-580 wall with a structural anchor should ensure the stability of the passive failure of the embedded vertical element, thus preventing the safety factor of rotation around the lever level greater than or equal to 1.5, FSR> 1.5, and ensuring ZZ48-580, because PLA allows the trade union to monitor the safety of the workplace. Contractors are more likely to comply with safety standards, and workers are more likely to exercise their rights in work. Flammable or flammable liquids shall not be stored in exits, staircases, or areas normally used for personnel passage.


Diversification: personal feasibility study ensures that entry-level workers are from the trade union sponsored apprenticeship program. If we want to limit the movement and increase any additional load, we will determine the active lateral ZZ 44-700 earth pressure distribution or the static lateral earth pressure distribution. No flammable or flammable liquids can be stored on site without the approval of the ZZ 46-700 Seattle fire department, the facilities management and construction safety department. This plan is numerous and has the best record of graduating ethnic minorities and women. Flammable liquids must not be injected into the container unless the nozzle and container are electrically connected to ZZ 48-700. In California, trade union construction accounted for 88% of all apprenticeship programs in the state. It is forbidden to smoke or open fire within 35 feet of the place where ZZ, 50-700 fuel is used, stored or transferred, or flammable liquids or gases. Determine the distribution of passive lateral earth pressure; determine the embedded D of the o element of the vertical wall, providing a safety factor equal to 1 to prevent the rotation of the surrounding point O (the horizontal plane of the pull rod).


Section Dimensions Mass Moment of inertia Modulus of section




Width Height Thickness Thickness Pile Wall


b h t s




mm mm mm Mm kg/m kg/m2 cm4/m cm3/m
ZZ12-700 700 314.2 8.6 8.5 67.9 97 18971 1208
ZZ13-700 700 315.2 9.6 9.5 74.2 105.9 20611 1308
ZZ14-700 700 316.2 10.6 10.5 80.5 114.9 22262 1408
ZZ12-770 700 343.5 8.6 8.5 72.8 104 21496 1252
ZZ13-770 700 344 9.1 9 76.2 108.9 22433 1304
ZZ14-770 700 344.5 9.6 9.5 79.6 113.8 23370 1357
ZZ17-700 700 420 8.5 8.4 73.3 104.7 36425 1735
ZZ18-700 700 420.5 9.1 9 76.7 109.6 38001 1807
ZZ19-700 700 421 9.6 9.5 80.2 114.6 39578 1880
ZZ20-700 700 421.5 10.1 10 83.7 119.5 41155 1953
ZZ24-700 700 459.2 11.3 11.2 95.8 136.9 55949 2437
ZZ26-700 700 460.2 12.3 12.2 103 147.1 59843 2601
ZZ27-700 700 460.7 12.8 12.7 106.4 152 61641 2676
ZZ28-700 700 461.2 13.3 13.2 110.1 157.3 63740 2764


CONTACT US TODAY!

Contact with us

Shunli Steel Group
Tel: 0086 -25 - 84722733
Fax: 0086 - 25 - 84730966
Hand phone: 0086 -13739192886;
001-9023936528(Canada & USA)

QQ: 236979001
E-mail: admin@shunlisteel.cn

Get in touch

CONTACT US TODAY!

Sheet piling for sale     About Us      Products       Technical Libirary       Certificates      Facilities       Contact Us
Copyright 2015 Shunli Cold-formed Steel Industrial Co., Ltd. All rights reserved  sheet piling prices