Shunli steel sheet pile, which manufacturing activityDuring the power to improve many aspects of the production of steel sheet piles, which allows......

Built using stone retaining wave wall project cost about 500 million yuan, the construction period of 6 months. Through the above analysis and calculation......

distribution box should be installed in a dry place at room temperature and ventilation,sheet piles power distribution box is provided with rain and dust measures...

1, which starts from the corner piece play, since each sheet piles up to end without a pause. Therefore, short pile machine walking routes, convenient construction, the driven speed.....

A spiral steel pipe (steel) length dimension example1. beam length dimension ⑴ standard length train tracks are 12.5m and 25m two kinds.

This is the first shipment for the whole pipe pile order and less than 1/3 of the total quantity. The lengths of the pipe piles are 24m to 33m, in steel grade S355....

Shunli is offering one-stop services and could provide all the material above.

According to Eurocode EN1993-5, the sheet piles have been classified into three classifications.

The detailed classification method is as per below table:

Compared to hot-rolled sheet pile which has got over 100 years’ history, cold-formed sheet pile is a new technology and it has a lot of advantages. It is a continuous cold-forming process through numerous rollers.

Shunli Steel joined DFI as a corporate member at the end of 2015.DFI is an international association of contractors, engineers