direct shear test includes vane shear test is a metal crucible pressed into the soil layer and the application of torque measured by the transmission rod or spring torsion angle...

Sealed tank or sample bag is usually disturbed by the analysis of the laboratory to introduce the sheet pile in situ test steel sheet piles results and the relative density of non-cohesive soil...

Water and earth pressure of embedded steel sheet pile retaining wallThe foundation of embedded steel sheet pile retaining wall is soil...

Advantages of OT sheet piles:1、the structural form of symmetry、is very conducive to re-use;
2、rod and internal support and other ...

1、the lock symmetry distribution in the neutral axis on both sides of a specific location、the cross-section to improve the quality of bending modulus reduction...

The steel sheet piles saw-tooth wall is the AZ steel sheet piles connection which is different direction.
This arrangement provides a very broad cross-section...

The development of the sheet piling bearing foundation and corner connection opens a new era of load-bearing piles by connecting the same number of...

Application of Box Steel Sheet Piles and Its ApplicationSteel Sheet PilesBox-type pile is welded by a single Steel Sheet Piles, and its material contains...

Two steel sheet piles can be crimped or welded together. Usually 3 to 4 crimp points per meter are required, and other forms may...

U-shaped sheet pile Tong Tong is a single pile supply, this form is easy to supply, reduce the site hoisting, positioning time.