Z type cold formed sheet pile MSZ17-312 ,MSZ17-340,MSZ17-350,MSZ17-375

The middle light plate pile MSZ17-406 can be used to prevent erosion to protect the shore. When a person works or passes under a scaffold sheet pile manufacturers, a screen or a grid or a similar thing should be set between the toe plate and the top MSZ17-375 guide. For normal freshwater applications, the components are supplied in accordance with the provisions of galvanized steel or aluminum steel 2 trusses and gaskets. The Z type cold - formed sheet pile MSZ17-312 MSZ17-340 should be designed to support four times the rated MSZ17-350 load. At least, an impermeable hat should be placed on the surface of the slope, and a continuous roof / groove connected to the slope should be built at the toe of the slope / wall.

First to alert the steel sheet pile design and calculation, our factories can adjust process parameters depending on size and specifications, and calculate the total cost. In Asia, U-shaped steel sheet pile is still the most commonly used, is now the construction of the pier, deep foundations, seawalls, bulkheads are required ž size. Now, in Europe, especially Western Europe, steel sheet piling contractor like ž profile. HZ combined wall, OZ sheet piles and tubular composite wall in all Z-type products.

The installation of relatively light steel boxes can be completed by MSZ17-350 at the site and then hoisted to the position. Or, it can be assembled on the scene without the need for heavy equipment. The installation method, MSZ17-340 is different, and overcome the difficulties or restrictive installation conditions to the Contractor's skill and imagination open.Micro Zee 17 steel sheet pile shall not be less than MSZ17-375 and MSZ17-406 set inch plywood is equivalent to the United States Plywood Association BB, in group I, external or similar materials. Two supporting MSZ17-312 loader should be 2 "x 4" or 1 "X10" for coarse selection of wood or better.