The Steps of Lassen Steel Sheet Piles Construction

Lassen steel sheet pile is widely used in major engineering buildings due to its high strength, simple construction and good durability. It plays an important role in permanent engineering, such as the steel sheet pile project at the port terminal, which can greatly improve work efficiency. In the bridge project, it can also function as a retaining wall.

The detailed steps of Lassen steel sheet piles construction are as follows.

Step 1: Ensure that the steel sheet pile meets various construction indicators before construction.

Step 2: During the construction process, do not remove the support during excavation, concrete pouring or transportation. Because the support is so heavy that heavy objects cannot be put on it.

Step 3: In the measurement of the retaining wire, according to the width design requirements of the foundation pit and the groove, the bottoming position of the steel sheet pile should be measured, and the position should be marked.

Step 4: When inspecting the steel sheet pile, we must first confirm whether its surface is the same as the standard. If the appearance of the steel sheet pile has certain corrosion, the thickness of the section should be measured. In addition, it is necessary to inspect the chemical composition and mechanical properties, the tensile and bending of each type of steel sheet pile.