Publish Time: 2018-01-12 Origin: Sheet pile PU11R,PU13R,PU14R,PU15R
Sheet pile walls have been used to support excavations for below-grade parking structures, basements, pump houses, and foundations, to construct cofferdams, and to construct seawalls and bulkheads. Permanent steel sheet piles are designed to provide a long service life. Vibratory hammers are typically used to install steel sheet piling prices. If soils are too hard or dense, an impact hammer can be used to complete the installation. At certain sites where vibrations are a concern, the sheets can be hydraulically pushed into the ground.
Sheet pile PU11R PU13R Only for pv 14R P U15R models. Pouring soft soil-Soft soil construction, PUEAAR. Depending on the surrounding ground surface, click Load on the No. 13 settlement menu bar and select the additional load to open the corresponding input window for PU14R P U15R.The traditional discovery method was developed by Taraggi 13, as shown in Figure 60.
| Sectio | Dimensio | Ma | Moment of inertia | Modulus of sectio | ||||
| Width | Height | Thickne | Per pile | Wall | ||||
| h | t | |||||||
| mm | mm | mm | mm | kg/m | kg/m2 | cm4/m | cm3/m | |
| PU 6 | 600 | 226 | 7.5 | 6.4 | 45.6 | 76 | 6780 | 600 |
| PU 7 | 600 | 226 | 8.5 | 7.1 | 49.9 | 83.1 | 7570 | 670 |
| PU 8 | 600 | 280 | 8.0 | 8.0 | 54.5 | 90.9 | 11620 | 830 |
| PU 9 | 600 | 280 | 9.0 | 8.7 | 58.8 | 98.0 | 12830 | 915 |
| PU 11 | 600 | 360 | 8.8 | 8.4 | 61.8 | 103.0 | 19760 | 1095 |
| PU 16 | 600 | 380 | 12.0 | 9.0 | 74.7 | 124.0 | 30400 | 1600 |
| PU 20 | 600 | 430 | 12.4 | 10.0 | 84.3 | 140.5 | 43000 | 2000 |
| PU 25 | 600 | 452 | 14.2 | 10.0 | 93.6 | 156.0 | 56490 | 2500 |
| L2S | 500 | 340 | 12.3 | 9 | 69.7 | 139.4 | 27200 | 1600 |
| L3S | 500 | 400 | 14.1 | 10 | 78.9 | 157.8 | 40010 | 2000 |
| L4S | 500 | 440 | 15.5 | 10 | 86.2 | 172.0 | 55010 | 2500 |
| L5S | 500 | 450 | 20.6 | 11.5 | 106.0 | 212.0 | 72000 | 3200 |
| JSP2 | 400 | 200 | 10.5 | 0 | 48 | 120.0 | 8740 | 874 |
| JSP3 | 400 | 250 | 13.0 | 0 | 60.0 | 150.0 | 16800 | 1340 |
| JSP4 | 400 | 170 | 15.5 | 0 | 76.1 | 190.0 | 38600 | 2270 |
| GU12-500 | 500 | 340 | 9 | 8.5 | 56.6 | 113.2 | 19640 | 1155 |
| GU13-500 | 500 | 340 | 10.0 | 9.0 | 60.8 | 121.7 | 21390 | 1260 |
| GU15-500 | 500 | 340 | 12.0 | 10.0 | 69.3 | 138.6 | 24810 | 1460 |
| PU6R | 600 | 280 | 6.0 | 6.0 | 42.2 | 70.0 | 8940 | 640 |
| PU7R | 600 | 280 | 6.5 | 6.3 | 44.3 | 74.0 | 9580 | 685 |
| PU8R | 600 | 280 | 7.5 | 6.9 | 48.7 | 81.0 | 10830 | 775 |
| PU9R | 600 | 360 | 7.0 | 6.4 | 49.5 | 82.0 | 16930 | 940 |
| PU10R | 600 | 360 | 8.0 | 7.0 | 53.8 | 90.0 | 18960 | 1055 |
| PU11R | 600 | 360 | 9.0 | 7.6 | 58.1 | 97.0 | 20960 | 1165 |
| PU13R | 675 | 400 | 10.0 | 7.4 | 65.6 | 97.0 | 25690 | 1285 |
| PU14R | 675 | 400 | 11.0 | 8.0 | 70.5 | 104.0 | 28000 | 1400 |
| PU15R | 675 | 400 | 12.0 | 8.6 | 75.4 | 112.0 | 30290 | 1515 |