Cold-formed SLZ Sheet Piles are widely used in Europe, North and South America.
Its advantages are shown as followed:
1. It is flexibly designed to have a high section modulus and mass ratio.
2. It has a higher moment of inertia, which increases the stiffness of the sheet pile wall and reduces displacement and deformation.
3. Its large width effectively saves the time of hoisting and piling.
4. As the width of the section increases, the number of shrinkage of the sheet pile wall is reduced, so its water-stopping performance is directly improved.
5. It can be thickened in its severely corroded parts, so its corrosion resistance is more excellent.
Z Type Sheet Piles could be delivered in single pile, double pile (loose) and double pile with tack welding(crimped) / full welding form.
Compared to U type sheet piles, Z Type Sheet Piles could provide a larger section modulus with lower material cost (lower weight), which is much more economic than traditional U sheet piles. One advantage of Z Type Sheet Piles is that during installation, the flange of the pile will be on the same line, which will be very convenient for the installation of waling beams.
Z Type Sheet Piles could be delivered in single pile, double pile (loose) and double pile with tack welding(crimped) / full welding form.
Product Production Range:
Thickness: 4-16mm
Length: Not limited, as per buyer's request.
Now 800mm and 850mm wide Z Type Sheet Piles are available in our mill, which will provide certain section modulus with a lower unit weight per square meter. Customized designs are also available and welcomed in our company.
Coating and anti-corrosion job is also available for Z Type Sheet Piles in our mill.
Material: Q235B, Q345B, S235, S240, SY295, S355, S430, S460, A690, ASTM A572 Grade 50, ASTM A572 Grade 60. All Chinese Standard, EN Standard, ASTM Standard and other standard material are available on request.
Manufacturing & Inspection Standard: EN10249-1 / EN10249-2