Steel sheet pile retaining wall is currently used in infrastructure projects is very frequent, small to the construction of fire piles of steel piles support, municipal pipeline pipeline excavation steel sheet pile retaining support, to achieve high-iron pile platform construction of steel sheet pile support, dam construction steel sheet pile Retaining walls and so on. Then the steel sheet retaining wall design requirements which? I believe that not every designer can find out, the following we and the blue road plate pile of engineers together to see it!
Steel sheet retaining walls must be able to work under two special conditions:
1、the steel sheet pile wall used in the process can think of the worst conditions;
2、the steel sheet retaining wall normal use conditions.
These two types of conditions, respectively, on behalf of the steel sheet retaining wall bearing capacity limit state and the normal use of the limit state.
The ultimate stability of the retaining wall structure of the steel sheet pile retaining wall should take into account the overall stability of the retaining wall structure of the steel sheet pile, including the mechanical properties of the soil, the structural failure, the excessive deformation of the wall and the influence of the soil change on the adjacent structure. The failure mode of the steel sheet retaining wall includes movement or rotation. The stability of the retaining wall of the steel sheet pile depends on the degree of earth pressure, and the earth pressure can only be fully mobilized when the structure is quick, and then the bearing capacity limit state.
Steel plate retaining wall normal use limit state design to consider the steel sheet pile wall deformation and soil movement, must ensure that both will not exceed the allowable range. Compared with the deformation of the soil under the normal use limit state, the deformation of the soil is much larger when the earth pressure is fully mobilized. As the force acting on the retaining wall of the steel sheet pile and the force in the soil are inversely proportional to the deformation of the wall, the deformation in the normal use limit state is the control standard of the wall balance. Although the steel sheet pile wall can not directly calculate the deformation of the wall, but can control the degree of pressure to adjust the degree of normal use to limit the state. In practice, a safety factor is usually introduced.
The lack of experience of the designers often ignore the steel sheet retaining wall design pre-preparatory work, that is, the need to use what type of steel sheet pile, piling more difficult place is usually used high-strength steel sheet pile, so that less one or more support, Thereby reducing the workload. The designer must be fully aware of the situation and the resulting impact of the steel sheet retaining wall in use.
At the same time, the designer should also consider that the design width of the retaining wall of the steel sheet pile is not necessarily an integral multiple of the standard width of the sheet pile, with the change of the axis of the sheet pile wall, the error caused by the production and setting of the sheet pile, Gave the final closure of the sheet pile wall to bring suffering.
